MoG tactical gloves logo

Standards & protection levels

gloves tested and certified by accredited labs according to European EN standards

All or our gloves are tested and certified by accredited labs according to the European EN standards for PPE (2016/425 regulation), including standard such as EN ISO 21420, EN 388, EN 407, EN 511 or EN 659 to name a few.

Also, when developing new products for specific projects or tenders, it is possible to discuss which performance levels should be achieved according to the defined standards. Frequently, other tests are required as well to obtain certain fabric properties as well. During the course of the project, this is closely monitored by us.

CE standard for gloves

CE Categories

Learn more about Cat. 1, Cat. 2 and Cat. 3.
EN 420:2003 standard for gloves

EN 21420:2020

Protective gloves – general requirements and test methods
EN 388:2016 standard for gloves

EN 388:2019

Protective gloves against mechanical risks
EN 407 standard for gloves

EN 407:2020

Protective gloves against thermal risks (Heat and/or fire)
EN 511:2006 standard for gloves

EN 511:2006

Protective gloves against cold
EN 659:2003 + A1:2008 A specialist standard for gloves used in firefighting

EN 659:2003 + A1:2008

A specialist standard for gloves used in firefighting
EN 1149 electrostatic properties

EN 1149

Electrostatic properties

Some recurring issues regarding …

Puncture resistance

Puncture incidents are an increasing threat facing a.o. police officers, prison guards, rescue workers, etc. When it comes to protection against punctures, it is crucial to point out the major difference between puncturing with a blunt object and needle stick. As far as needlestick incidents are concerned, we can be very clear on this: it is an illusion to assume that one specific material or glove is 100% needle-proof. There can always be situations in which a needle penetrates the material and causes an injury.

There are two global standards that express the level of protection a glove provides against mechanical risks (including punctures).

  • European standard : EN 388; also used in other parts of the world
  • American standard : ANSI/ISEA 105

Protection against water

Protection against cold and water in gloves is covered by the EN 511 standard. As far as protection against water is concerned, it is interesting to point out some nuances in the terminology used.

  • Water-resistant: able to resist the penetration of water to some degree but not entirely
  • Water-repellent: not easily penetrated by water, especially as a result of being treated for such a purpose with a surface coating
  • Waterproof: impervious to water
    The MoG Shelter is a 100% waterproof glove based on a 3-layer lamination technology.

Flame Resistant vs. Flame Retardant

Covered by the EN 407 standard, protection against heat and flames is another issue where mis­per­cep­tions are commonly noticed.

  • Flame resistant = a material that is inherently resistant to catching fire (self-extinguishing) and does not melt or drip when exposed directly to extreme heat.
  • Flame retardant = a material that has been chemically treated to self-extinguish.

Several MoG gloves are based on a flame resistant composition. When the EN 407 standard is mentioned with these particular gloves, you can check what the actual performance level is regarding flame or heat protection.